Foscam FI8904W User Manual page 21

3.5.2 Add cameras in WAN
If you want to view all cameras via the internet(remote computer), you will need to add them
using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed
through the internet. (Read How to configure DDNS settings in chapter 3.10)
Login to the first camera using a DDNS domain name and port.
If you have several cameras, you can use the same DDNS domain name; you only need to set a
different port number for each camera.
Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera's name, DDNS
domain name, port number. Enter user name and password and then choose Add. (Figure 3.11)
NOTE: Here the Host must be entered as the second camera's DDNS domain name, not its LAN
IP.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Use DDNS domain name and port to login
Figure 3.10
Technology Co., Limited
Technology Co., Limited
86 86 755 755 2674 2674 5168 5168
w ww.foscam.co
w ww.foscam.co
Make sure each camera you need
add could login with DDNS name and
port
m
m
20
20