Temperature Measurements - Silvercrest SSOT 6 A1 Operation And Safety Notes

Operation
3. Press the "FOREHEAD" button
and can be corrected with the "MEM / SET" button
4. Press the "FOREHEAD" button
will fl ash and can be corrected with the "MEM / SET"
button
1
Repeat steps 3 and 4 to set the values for the year,
month and day or to switch the sleep mode on or off .
Finally, press the "FOREHEAD" button
will be taken over and the appliance reverts to stand-
ard mode.

Temperature measurements

Measuring room temperature (standard mode)
When you have fi nished setting the time and date and do
not carry out any further procedures, the device switches
to sleep mode after 1 minute in order to save the battery.
In the condition as supplied to the customer the sleep
mode is activated, as shown by the
display is completely switched off . When the sleep
5
mode is deactivated, the device remains switched on,
while the time and room temperature are still shown and
updated once a minute. The LC display
the time and date alternately (Illustration D).
Measuring body temperature (ear mode)
IMPORTANT! It is advisable to carry out 3 meas-
urements in a row on the same ear and to take the highest
temperature as the measured value. A new measurement
108 GB/MT
.
. The hours will fl ash
4
again. The minutes
4
. The settings
4
symbol, and the LC
shows
5
.
1