LG MG810c Service Manual page 37

3. H/W Circuit Description
E. ADC Channels
ABB ADC block is composed of 4 internal ADC(Analog to Digital Converter) channels and 4 external
ADC channel. This block operates charging process and other related process by reading battery
voltage and other analog values.
G. Switch ON/OFF
KG810 Power State : Defined 4cases as follow
- Power-ON : mobile is powered by main battery or backup battery.
- Power-OFF : mobile isn't any battery.
- Switch-ON : mobile is powered and waken up from switch-off state.
- Switch-OFF : mobile is powered to maintain only the permanent function(ULPD).
To enter into Switch-ON state, one of following 4 condition is satisfied.
- PWR-ON pushed after a debouncing time of 30ms.
- ON_REMOTE : After debouncing, when a falling edgeis detected on RPWON pin.
- IT_WAKE_UP : When a rising edge is detected on RTC_ALARM pin.
- CHARGER_IC :When a charger voltage is above VBAT+0.4V on VCHG.
Table 9. ADC Channel Spec.
- 36 -