sunjoe iON8PS Operator's Manual

sunjoe iON8PS Operator's Manual

40-volt 8-inch cordless pole chain saw

Advertisement

Quick Links

A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
m
DANGER!
This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
m
WARNING!
This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
m
CAUTION!
This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
General Safety
m
WARNING!
When using cordless yard tools, basic
safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury, including the
following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly fitted and
in correct working order.
2. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
3. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
4. Do not use the pole chain saw in the rain.
5. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
6. Do not force the tool – It will do the job effectively and
safely if it is used at the rate for which it was designed.
7. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
8. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footware and close-fitting clothing is
recommended when working outdoors with power tools.
9. Wear protective hair coverings to contain long hair.
© 2014 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
40-VOLT 8-INCH CORDLESS
POLE CHAIN SAW
Model iON8PS
10. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
11. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to filter out miscoscopic particles is recommended.
12. Do not overreach – Keep proper footing and balance
at all times.
13. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
14. Disconnect tool – Turn off the power switch and remove
the battery when it is not in use, before servicing,
when transporting or when changing the chain or other
accessories.
15. Reduce the risk of unintentional starting – Make sure
the safety switch and the trigger switch are in the OFF
position before inserting the battery in the unit. Do not
carry the pole chain saw with the safety switch and the
trigger switch engaged.
16. Use recommended accessories – Consult the owner's
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts and any other conditions that
may affect the tool's operation.
18. Never leave tool unattended while it is running – Turn
the power OFF by removing the battery from the unit.
Do not leave the saw until the cutting bar comes to a
complete stop.
19. Avoid unintentional starting – Do not carry the pole
chain saw with your finger on the switch.
20. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
21. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you
are tired.
22. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
SAVE THESE INSTRUCTIONS
1
Form No. SJ-iON8PS-880E-M
OPERATOR'S MANUAL

Advertisement

Table of Contents
loading

Summary of Contents for sunjoe iON8PS

  • Page 1 40-VOLT 8-INCH CORDLESS POLE CHAIN SAW Model iON8PS Form No. SJ-iON8PS-880E-M OPERATOR’S MANUAL A Division of Snow Joe , LLC ® IMPORTANT! 10. Always wear safety glasses and ear defenders to provide eye and ear protection – Everyday eyeglasses Safety Instructions only have impact resistant lenses and do not provide the same protection as safety glasses.
  • Page 2: Before Using

    WARNING! 9. Check the condition of the chain guide, chain, fasteners Some dust and debris created by the and safety switch before each use. Replace excessively use of the tool could contain chemicals known to the State worn or missing parts. of California to cause cancer and birth defects or other 10.
  • Page 3: After Using

    14. Never operate a damaged machine. • Keep all guards in place on the pole chain saw. Make sure they are in proper working order. 15. Do not overload the machine. • Do not overreach or extend arms above shoulder height. WARNING! To reduce the time of exposure to vibration •...
  • Page 4: Battery & Charger Safety Instructions

    Battery & Charger If an extension cord must be used, plug the charger into a properly wired 16 gauge or larger extension cord with the Safety Instructions female plug matching the male plug on the charger. Make sure that the extension cord is in good electrical condition. We pay a great deal of attention to the design of every battery •...
  • Page 5 Information about the battery Information about the charger and the charging process 1. The battery pack supplied with your cordless pole chain saw is only partially charged. The battery pack has to be 1. Please check the data marked on the rating plate of the charged completely before you use the tool for the first battery charger.
  • Page 6 Protection from environmental infuences 1. Wear suitable work clothes. Wear safety goggles. 2. Protect your cordless tool and the battery charger from moisture and rain. Moisture and rain can cause dangerous cell damage. 3. Do not use the cordless tool or the battery charger near vapors and flammable liquids.
  • Page 7: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all Keep bystanders and children instructions in the user...
  • Page 8: Technical Data

    Know Your Cordless Pole Chain Saw Read the owner’s manual and safety instructions carefully before operating the cordless pole chain saw. Compare the illustration below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 9: Carton Contents

    Unpacking Installing/Replacing the Guide Bar and Chain Carton Contents WARNING! Always wear heavy-duty gloves when • Cordless pole chain saw handling the bar and chain. Mount the bar and chain very • 40 V EcoSharp battery carefully so as not to impair the safety and efficiency of the ®...
  • Page 10 2. Remove the guide bar and chain from the mounting 6. Starting at the tip, mount the chain drive links into the surface (Fig. 3). bar groove, leaving a loop at the back of the bar. The chain will loosely fit until it is placed on the sprocket. (Figs.
  • Page 11: Preparing To Work

    8. Fit the chain/sprocket end cover back on by inserting the rear tab first into the rear tab slot, then screw the chain Fig. 11 tension adjustment knob without tightening it (Fig. 9). Fig. 9 Rear tab Preparing To Work Chain Lubricant CAUTION! Chain tension...
  • Page 12: Battery Pack Operation

    WARNING! Be certain that the chain is not in contact KICKBACK Fig. 13 with any object when you start the motor. DANGER ZONE WARNING! Keep hands away from the chain. Keep hands on the handles. Do not overreach. A good, firm grip on the tool using both hands will help you maintain control.
  • Page 13: Charging The Battery

    3. Place the battery pack into the charger by sliding the To reduce the risk of electric shock, do not allow water to flow pack as shown to lock it into position. When you insert into the charger. the battery into the charger, the bottom red light will When to Charge the EcoSharp iBAT40 illuminate to indicate that the battery is charging (Fig.
  • Page 14: Operation

    2. Take off the bar sheath. Fig. 17 3. Make sure the guide bar is not touching the ground or any other object. 4. Hold the pole chain saw firmly with both hands. 5. To turn the tool ON, push and hold the safety lock switch on the top of the handle grip with your thumb and then squeeze the trigger switch with your fingers.
  • Page 15: Cutting Tips

    Adjusting the Multi-Angle Head Fig. 21 The pole chain saw head can be rotated for different cutting angles: 0º or 30º. 1. Turn off the switch. 2. Press the multi-angle head adjustment button to loosen the head (Fig. 24). Fig. 24 Telescopic pole 4.
  • Page 16 Load Fig. 26 Second Cut First Cut 1/3 Diameter Finishing Cut 60º MAXIMUM Fig. 27 Basic Cutting Procedure • Now make your finishing cut from the topside of the This unit is designed for trimming small branches and limbs branch smoothly and neatly against the main member so up to 7.1 in.
  • Page 17: Maintenance

    can result in serious injury. Do not rely exclusively upon the WARNING! Always remove the battery from its housing safety devices built into the saw. As a pole chain saw user, you before performing any adjustments, maintenance or repairs to should take several steps to keep your cutting jobs free from your pole chain saw.
  • Page 18: Chain Sharpening

    Chain Maintenance Table Chain Pitch Limiter Tooth Level (a) File Diameter (d) inches inches inches 3/8 Mini 9.32 0.018 0.45 5/32 0.325 8.25 0.026 0.65 3/16 9.35 0.026 0.65 13/64 0.404 10.26 0.031 0.80 7/32 Chain Sharpening • To move the chain forward, use a screwdriver. •...
  • Page 19: Chain Sprocket

    Snow Joe + Sun Joe dealer or call the Snow Joe ® ® ® iON8PS cordless pole chain saw by ordering online at Sun Joe customer service center at 1-866-SNOWJOE ® snowjoe.com or, to order by phone, contact Snow Joe ®...
  • Page 20: Troubleshooting Tips

    • Replace with original spare part Support Record the following numbers from the housing or handle of your new product: If your Sun Joe iON8PS cordless pole chain saw requires Model #: ® service or maintenance, please call 1-866-SNOWJOE i O N 8 (1-866-766-9563) for assistance.
  • Page 21 Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this saw. Contact Snow Joe + Sun Joe if you are unsure ®...
  • Page 22 NOTES...
  • Page 23 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe + Sun Joe are dedicated to you, our customer. We strive to make your experience as pleasant ® ® as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us.
  • Page 24 snowjoe.com...

Table of Contents