Switching On Highway For The First Time - PURE Highway 400 Manual

Switching on Highway for the first time

RECEIVER
CONNECTING
LANGUAGE
ENGLIsh
AUDIO OUT
FM TRANSMIT
FM FREQ
87\60MHZ
SCANNING
DIG\ RADIO
14
1. Turn on your vehicle's ignition to ensure that the receiver is switched on.
Note: The receiver LED will remain illuminated for a short period of time to indicate
that it is powered on.
After a few seconds, your controller will automatically connect to the receiver. If your
controller doesn't connect to the receiver, see 'Troubleshooting' on page 23.
2. Choose your display language by turning the Select dial to highlight the language
you want. Push the Select dial in to confirm your choice.
3. Turn and press the Select dial to choose the way that you have connected
Highway to your audio system. If you are connecting via an available FM frequency,
select 'FM TRANSMIT' and move to the next step. If you are connecting using an
auxiliary cable, select 'LINE OUT' and skip to step 5,
4. Turn and press the Select dial to choose an unused FM frequency that you want
Highway to use for transmitting to your audio system. The recommended frequency
for transmitting to your audio system in the UK is 87.6 MHz.
Note: You'll need to tune your audio system to this FM frequency when ever you want
to listen to Highway. For easy access, you can store this FM frequency as a preset on
your audio system (see your vehicle's owner's manual for more information).
5. Wait for Highway to complete an autotune and find all available digital stations.
When the autotune is complete, a station will start playing.