Switching Between Sleep, On And Off - PURE Jongo A2 Manual

Choosing your audio connection
Connector on Jongo
Analogue audio
Digital coaxial out
Digital optical out
Note: Audio output is dependant on the source file quality.

Switching between Sleep, On and Off

Jongo has three power states, Sleep, On and Off. In Sleep, Jongo remains
connected to the wireless network and waits to receive audio.
To enter Sleep, briefly press the Power button (Power light turns amber).
Once in Sleep, press the Power button to switch to On (Power light turns green).
To turn Jongo off, hold the Power button until the Jongo power light turns red, then
release.
Cable
Dual phono to 3.5mm,
dual phono to dual phono
Phono to phono
TOSLINK
Output
DAC-processed
Hi-Fi audio
Raw digital audio
Raw digital audio
EN
9