Installing The Wireless Controller - PURE Highway 400 Manual

Installing the wireless controller

1.
2.
C
3.
B
4.
A
Slide the back cover from the wireless controller and fit the supplied
batteries with the correct polarity.
WARNING: See the 'Safety instructions' on page 2 for more
information on fitting and using the batteries.
Choose an area on your dashboard (A) where you want to install the
wireless controller and wipe down with the supplied cleaning wipe.
Ensure the surface is completely clean and dry before adhesion.
WARNING: See page 6 for positioning guidance.
Attach the bracket (B) to your dashboard.
Slide the wireless controller (C) on to the bracket until you hear it click
into position.
EN
11