Network Settings; Ethernet; Wireless - COMPRO IP55 User Manual

Compro IP55/60/70 Network Camera

Network Settings

Here you can check your network settings and adjust the detailed settings.
Figure 5-9. Network settings

Ethernet

Set up the IP address for the IP camera to obtain IP address via DHCP (recommended), or use the manually
inputted static IP address, or obtain IP address via PPPoE with which you need to provide valid user name and
password.

Wireless

If you have installed the Compro wireless adaptor on your IP camera, you can set up the wireless connection
in this page. To connect wirelessly, please check the [Use Wireless First] box to give priority to wireless
connection when LAN network is also connected. And then provide the necessary information on IP address
(to obtain IP address via DHCP or use specified static IP address) and access point. And click [Save] for the
changes to take effect.
Figure 5-10. Wireless settings
5-6
Network Settings