Samsung UE55KS7500 E-Manual page 54

Digital Clean View
●
" This function is available for analogue channels only.
Analogue Clean View
●
" This function is available for analogue channels only.
Auto Motion Plus
●
"
When LED Clear Motion
Smart LED
●
" Controls the brightness of individual areas on the screen to maximise contrast automatically.
" This function is not available on certain models in specific geographical areas.
Film Mode
●
Try Now
" This function is only available when the input signal is TV, AV, Component (480i, 1080i), or HDMI (1080i).
HDMI UHD Color
●
" If you set the HDMI connector to On, the TV turns off and then on automatically.
" For the SUHD models, each HDMI connection can be individually optimized for
UHD models, make sure to connect to the HDMI IN 1 port of the TV.
"
When you connect the TV to the external device that supports only UHD 24 or 30 Hz frequency or any FHD
frequency, the
" The HDMI connector with
while the HDMI connector with
input signals. For more information, refer to "Supported Resolutions for each of UHD Input Signals".
HDMI Black Level
●
" This function is only available when the input signal, connected to the TV via an HDMI connector, is set to
RGB444.
Dynamic Contrast
●
is set to On, the screen appears darker than when it is Off.
Try Now
HDMI UHD Color function may not be available. In this case, set
HDMI UHD Color
HDMI UHD Color
Try Now
Try Now
set to Off supports up to UHD 50P/60P 4:2:0 input signals,
set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2
HDMI UHD Color. For the
HDMI UHD Color to Off.