Setting satellite system
Settings
Broadcasting
You can configure a set of satellite dish settings before performing a channel scan.
"
This function is only available on certain models in specific geographical areas.
Changing teletext language
Settings
Broadcasting
You can set or change the teletext language. To watch the teletext broadcast in your preferred language,
select a language to use in
broadcast in your secondary preferred language set in
"
This function is only available on certain models in specific geographical areas.
Showing common interface menu
Settings
Broadcasting
You can view information about common interfaces.
CI Menu
●
Enables the user to select from the CAM-provided menu. Select the CI menu based on the menu PC
Card.
Application Info
●
Displays information about the CAM inserted into the CI slot and about the "CI or CI+ CARD" inserted
into the CAM. You can install the CAM any time, with or without the TV turned on.
CICAM PIN Manager
●
Manages Common Interface Common Access Module (CICAM) PIN. Save PIN or change stored PIN
and then set other PIN options.
Descramble Mode
●
CAM Video Transcording
●
Configures the setting to transcode the video codec from the CAM automatically. Turn it Off if you
do not want to use it.
"
You must use a CAM that supports video codec transcoding.
Expert Settings
Expert Settings
Primary
Teletext. If this language is not supported, you can watch the teletext
Common Interface
Satellite System
Teletext Language
Try Now
Secondary
Teletext.
Try Now