Connecting to Samsung Smart Control
Pair the TV with the Samsung Smart Control.
When you turn on the TV for the first time, the Samsung Smart Control pairs to the TV automatically. If the
Samsung Smart Control does not pair to the TV automatically, point it at the remote control sensor of the
TV, then press the ① and ② buttons on the Samsung Smart Control simultaneously for 3 seconds or more.
Controlling External Devices with the TV Remote - Using the
Universal Remote
Control the TV and the connected external devices together with Samsung Smart Control.
Source
Universal remote setup
You can control external devices connected to the TV by using the remote control. For this purpose,
register external devices by following the instructions on the screen.
"
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's remote
control without any additional setup. For more information, refer to "Using Anynet+ (HDMI-CEC)".
"
Certain external devices connected to the TV may not support the universal remote feature.
"
Do not place any obstacles in front of an external device. It may cause signals from the remote control not to
be transmitted properly.
"
The TV memorises both the external device and its connection port (HDMI 1, HDMI 2, etc.).
Controlling the TV with a Keyboard or Gamepad
Connecting a keyboard or gamepad makes it easier to control the TV.
Connecting a USB keyboard
Plug the keyboard cable into the USB port.