Listening To The Radio - Sanyo MCD-Z110F Instruction Manual

LISTENING TO TAPES
1.
2.
3.
4.
5.
Set the FUNCTION switch to TAPE.
Press the STOP/EJECT button. The cas-
sette holder opens.
Load the cassette into the cassette holder
(Fig 9). After loading the cassette, press the
cassette holder back into position.
Press the PLAY button to begin playback.
Press the STOP/EJECT button to stop play-
back at any time. Press it again to remove
the cassette.
When the end of the tape has been
reached, the tape stops automatically.
Note:
- Use the normal tape (TYPE 1).
- Endless tapes cannot be used.
Do not use C-1OO (or longer) tapes.They
may jam in the mechanism.
Pauae
Press the PAUSE button to temporarily stop
playback or recording. Press it again to resume
operation.
Fast forward and rewind
Press the FFWD or REW button. When the desired
location has been reached, press the STOP/EJECT
button.
m
LISTENING TO THE RADIO
1.
2.
3.
4.
Set the FUNCTION switch to RADIO.
Select the desired radio band with the
BAND switch.
Tune in a desired station by turning the
TUNING control.
To turn the radio off, set the FUNCTION
switch to TAPE/OFF.
To receive FM stereo broadcasts
Set the BAND switch to FM STEREO.
- If the signal from an FM stereo station is
weak an~ reception is poor, set the BAND
switch to FM. The reception may be
improved, but the sound will be monaural.
To improve reception
FM:PuII out the telescopic aerial and adjust its
position.
AM: Rotate the unit.