Sanyo MCD-Z110F Instruction Manual page 7

Notes on handling compact discs
Do not expose the disc to direct sunlight,
high humidity or high temperatures for ex-
tended periods of time.
Discs should be returned to their cases af-
ter use.
Do not apply paper or write anything on the
disc surface.
Handle the disc by its edge. Do not touch
the playing surface (glossy side).
Fingerprints and dust should be carefully
wiped off the playing surface of the disc
with a soft cloth.
Wipe in a straight motion from the centre to
the outside of the disc.
Never use chemicals such as record clean-
ing sprays, antistatic sprays or fluids, ben-
zene or thinner to clean compact discs.
Temporarily stopping play
Press the PLAY/PAUSE button. The CD PLAY
indicator blinks. To resume play, press the button
again
Skip play
To skip to track 6 while track 3 is playing, press the
W SKIPASEARCH button repeatedly until "6"
appears on the display. To skip back to track 3
while track 6 is playing, press the M< SKIP/SEARCH
button repeatedly until "3" appears.
Search (forward/reverse)
If the W or ~< SKIP/SEARCH button is pressed
during play, the player will search at high speed in
the forward or reverse direction while the button is
being pressed. When the button is released, normal
play will continue.
Repeat play
Press the REPEAT button before or during play.
Each time the button is pressed, the repeat mode
changes as follows.
The REPEAT indicator blinks:
One track repeat mode.
The REPEAT indicator lights:
All tracks repeat mode.
The REPEAT indicator goes out:
Normal play mode.
PROGRAMMED PLAY
Up to 16 tracks on a disc can be programmed for
olav in anv order.
1.
2.
3.
4.
5.
6.
To begin the programmi~g procedure, se-
lect "CD" function first.
The same track can be programmed more
than once.
Load a disc that you want to programme
before starting programmed play.
Press the STOP/CLEAR button if
necessary.
Press the MEMORY button. The MEMORY
indicator and "Pr" blink.
Select a track by using the SKIP/SEARCH
button.
Press the MEMORY button.
Repeat steps 3-4 to programme additional
tracks.
Press the PLAY/PAUSE button to start play.
The MEMORY indicator remains lit.
When all programmed tracks have been
played, the player stops automatically.
The programme contents are retained in
memory.
To cancel programmed play, press the STOP/
CLEAR button twice.
Checking the programme
Press the MEMORY button twice in the stop mode,
the programmed tracks sequentially appear on the
display.
WHAT TO DO IF ...
If an abnormal display indication or an operating
problem occurs, disconnect the mains lead and
remove all batteries. Wait at least 5 seconds, then
reconnect the mains lead and reinstall the batteries
Resume the operation.
6