Input Skip - Sharp AQUOS LC-40LX530H Operation Manual

Setup menu (Continued)
Parental rating
This function allows TV channels to be restricted.
It prevents children from watching violent or sexual
scenes that may be considered inappropriate.
Repeat steps 1 to 3 in Setting a password.
1
Press a / b to select "Parental rating", and
2
then press ENTER.
Press a / b to select your desired rating, and
3
then press ENTER.
Selected
item
No block Cancel the restriction.
Block 5-18 Select desired age to restrict.
age and (Example) If "Block 13 age and below"
below is selected, programmes rated for ages
of 13 or more are restricted.
H Input skip
This setting allows you to skip the HDMI or PC input
on the "Input Source" menu.
HDMI1
HDMI2
HDMI3
PC
Description
Skip input selection of HDMI
Yes No
H Input label
You can assign each input source a label as you
prefer.
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input label", and then
4
press ENTER.
5
Press a / b / c / d to select letters, and then
press ENTER to label the input source.
• When you want to change the input label that you
have already assigned to the default name, press
c/d
to move to "CLEAR" on the "Input Label"
screen, and then press
6
Repeat the above until the name is fully spelt
out.
•The name can be 6 characters or less.
•When you want to set an input source name of
less than 6 characters, press
from the labelling menu.
NOTE
• You cannot change labels if the input source is A-TV and
D-TV.
H Position
For adjusting a picture's horizontal and vertical
position.
Selected item
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
Reset Reset position to factory preset values.
NOTE
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or signals.
H HDMI auto view (HDMI input mode only)
Selected item
Enable/ Set whether or not to use WIDE MODE
Disable
based on signal recognition, including an
HDMI signal.
H WSS
WSS allows a television to switch automatically among
the different screen formats. (On, Off)
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
• When receiving weak or unstable signals and for avoiding
wrong estimation of the signals, it is recommended to set
WSS to "Off".
ENTER.
RETURN
to exit
Description
Description
21