Displaying An Image From Hdmi Equipment; Input Skip - Sharp Aquos LC-32D43U Operation Manual

Using external equipment
To watch an HOMI/PC-IN equipment image,
select "INPUT4" or "INPUT5" from "INPUT
SOURCE" menu using INPUT on the remote
control unit or on the TV.
Press MENU to display the MENU screen, and
then press ......
/~
to select "Option".
This setting allows you to skip the HOMI/PC-IN Input
on the Input Selection operation.
Press MENU to display the MENU screen, and
then press ......
/~
to select "Setup".
Press ...
/T
to select "Input Skip", and then
press ENTER.
Press ...
/T
to select the Input (INPUT 4,
INPUT 5 or INPUT 6) you wish to skip, and
then press ENTER.
Press ...
/T
to select "HOMI Setup", and then
press ENTER.
Press ...
/T
to select the desired item and
press ENTER.
Press ......
/~
to select "Yes", and then press
ENTER.
Press MENU to exit.
Press ...
/T I ...... /~
to select the desired setting
and press ENTER.
Auto View Enable
Disable
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Audio
Select
Digital
Analog
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.
Press MENU to exit.
• Refer to your external equipment operation manual for the
signal type.
• "Audio Select" is only available for INPUT 5.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
@-
30