Specifications; Troubleshooting - Tecknet M001 User Manual

Specifications

Button Count:
Operating Frequency:
Resolution:
Receiver interface:
Operating Voltage:
Operating Current:
Distance:

Troubleshooting

1.What do I do if the mouse does not work?
• Make sure that the polarity of the batteries is correct. The positive (+)
and negative (-) ends of each battery must match the positive (+) and
negative (-) markings in the battery housing.
• Make sure the batteries are not discharged.
• Try to remove the batteries, and reinstall the batteries again.
• Verify that your computer's power management features are turned off.
• Check that the Nano receiver's USB connector is firmly attached to the
USB port of your computer.
• Still not working? Please try"Reconnection".
2.The USB Nano receiver is recognised by Windows
(XP, Vista, Win 7, 2000, 2003, 2007, Win8) but the cursor
does not move
• Check whether the low power indicator on the top of the mouse lights
up. If the sensor lights up, it is likely that the batteries are discharged.
Please replace them.
• If replacing the batteries does not help, it is likely that the mouse is not
connected to the receiver.Please try"Reconnection".
3.When I use the mouse, other 2.4G Cordless devices
work more slowly or fail temporarily – what should I do?
• The mouse has 34 channels to prevent interference. However the
mouse may cause interference with any cordless, radio-based device
that operates at 2402MHz - 2480MHz, such as a 2.4G telephone, 2.4G
baby monitors, 2.4G cordless routers and toys. To reduce interference,
5 buttons
2.4GHz
800/1200/1600DPI
USB version 2.0
1.5V
10mA
upto 10m
6