Tecknet M001 User Manual page 5

DPI Switch
The mouse supports 1600 DPI, 1200 DPI and 800
DPI. To switch to
either setting, press the DPI button.
• The default setting is 1200 DPI.
• Click the DPI button on the top of the mouse once
to switch from 1600 DPI to 800 DPI, the scroll
wheel LED will flash once times.
• Click the DPI button on the top of the mouse once
again to switch from 800 DPI to 1200 DPI, the
scroll wheel LED will flash twice.
• Click the DPI button on the top of the mouse once
again to switch from 1200 DPI to 1600 DPIthe
scroll wheel LED will flash three times.
Low Battery Power Indicator
The mouse is equipped with low power
indicator. When the battery
power gets low during the period of use,
the Indicator under
the Scroll Wheel will flash.Please
replace the battery.
Note: we recommend you use a AA
alkaline dry cell battery.
Reconnection
There is a wireless signal connection code for this mouse. High
temperatures, electro-magnetic fields or vibration may influence the
code signal and occasionally the mouse may need to be reconnected.
Both the mouse and Nano Receiver have a built-in code and one
mouse can be connected to one receiver, or several mice to one Nano
Receiver.
Low Power Indicator
4
DPI Indicator