Related Manuals for Tecknet M001
Summary of Contents for Tecknet M001
- Page 1 TeckNet 2.4GHz Cordless Mouse M001 User Manual For German, French language user manual, please download from our website: www.tecknet.co.uk . Sorry for the inconvenience.
-
Page 2: System Requirements
Welcome Thank you for purchasing thisTeckNet product. To ensure optimum performance and safety, please read these instructions carefully before operating the product. It is strongly recommended you keep this manual for future reference. System Requirements To use this mouse, your computer must meet the following hardware requirements and run one of the operating systems listed below. - Page 3 18-Month Battery Life The mouse consumes very little power andenables a long battery life of up to 18 months without changing the battery. However please note that the actual battery life may vary based on user and computing conditions. Start for using 1.Connecting the Receiver Take out USB Nano receiver and plug it into a free USB port in your computer.
- Page 4 5. Now the mouse is ready for using. Note: 1. Pairing process will stop if loading the battery first and then plug the Nano receiver beyond 5-10 seconds. 2. Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.
- Page 5 DPI Switch The mouse supports 1600 DPI, 1200 DPI and 800 DPI. To switch to either setting, press the DPI button. • The default setting is 1200 DPI. • Click the DPI button on the top of the mouse once to switch from 1600 DPI to 800 DPI, the scroll wheel LED will flash once times.
-
Page 6: Safety Measures
1. Unplug the Nano receiver from USB port, and plug it back in. And remove the AA battery from the mouse, and re-load it back in. 2. Move the Mouse to within 50cm of the Nano receiver or re-install the battery or press any key to reconnect;... -
Page 7: Specifications
Specifications Button Count: 5 buttons Operating Frequency: 2.4GHz Resolution: 800/1200/1600DPI Receiver interface: USB version 2.0 Operating Voltage: 1.5V Operating Current: 10mA Distance: upto 10m Troubleshooting 1.What do I do if the mouse does not work? • Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing. -
Page 8: Warranty
Warranty We warrant that product from authorised distributors will meet the applicable product specifications and be free from all defects in design, assembly, material and workmanship. Please contact TeckNet retailers, or visit our website for more information about the product.