Safety Measures; Specifications; Troubleshooting - Tecknet M002 Manual

Note on Handling Batteries
• Keep batteries out of the reach of children.
• Replace old or weak batteries promptly.
• Remove the batteries if the mouse is not going to be used.

Safety Measures

• Keep the mouse away from young children.
• Any attempt to disassemble, adjust or repair the mouse may result
in exposure and other safety hazards.

Specifications

Button Count: 5 buttons
Operating Frequency: 2.4GHz
Number of Channels: 34
Resolution: 1000/1500/2000DPI
Receiver interface: USB version 2.0
Operating Voltage: 1.5V
Operating Current: 6.5 mA
Distance: up to 15m

Troubleshooting

What do I do if the mouse does not work?
• Make sure that the polarity of the batteries is correct. The positive
(+) and negative (-) ends of each battery must match the positive
(+) and negative (-) markings in the battery housing.
• Make sure the batteries are not discharged.
• Please try to remove the batteries, and reinstall the batteries again.
• Verify that your computer's power management features is turned off.
• Check that the Nano receiver's USB connector is firmly attached to
the USB port of your computer.
• Still not working? Please try restoring the factory default settings
(Manual Syncing Steps)
The USB Nano receiver is recognized by Windows (Windows2000,
2003,XP,Vista,Win7,Win8,Mac10.x) but the cursor does not move.
• Check whether the low power indicator on the top of the mouse
lights up. If the sensor lights up, it is likely that the batteries are
discharged. Please replace them.
• If replacing the batteries does not help, it is likely that the mouse is not
connected to the receiver. Please try restoring the factory default settings
(Manual Syncing Steps) and ensure that the mouse is within the optimal
operational working distance (1.5m) from its USB Nano receiver.
5