Hyundai TRC 802 DRSU3 Instruction Manual page 99

5. Press the [MEMORy] Button .
Channel will be memorized. The indication of Preset with plus one will be displayed, and the
receiving Frequency will show. .
6. By repeating the process 3 - 5, then please memorize the other radio Channels.
7. Press the[ MEMORy] Button, then finish the memorizing process.
8. In radio mode, press Preset down or up button to select memoried station.
9. Press [MO/ST] button to select stereo or mono.
LISTEN TO ThE PRE-SET RADIO ChANNEL
1. Press [Band] Button, then select AM or FM.
You will receive AM/FM, and if you want to change to other, press the same button once
again.
2. Press [TUNING/SKIP +() or TUNING/SKIP -()] Button, then select your prefer channel.
3. If Max.frequency reached,return to the min frequency of current band and search up,until
the first frequency which is saved as CH1 reached or the Max.CH# reached,or press
[MEM] again,which is earlier,then stop. .
4. During Auto Memory,any key pressed will terminate auto memory and execute the key
function(which is pressed) except [VOL +/-].
Note:Auto search & Save only function in the current Band.
RECORDING
1. Press the [STOP/EJECT(
insert the Tape. Place a pre-recorded cassette tape Surface for Paly-Back into the slots on
the inside of the door with the exposed tape facing up.
)] button, then open the Cassette Compartment Lid and
ENG - 99
ENG