Maintenance - Miele CVA 3660 Operating And Installation Instructions

Cleaning and care

Maintenance

The capsule hopper in the brew unit
needs to be replaced after about
15,000 cups of coffee. Replacement
capsule hoppers are available from
Miele.
Settings F
K1 K2 K3 K4 K5 L
^ Select "Settings F" from the Main
menu, and then touch the OK sensor.
^ Use the arrow sensors to highlight
"Maintenance", and then touch the
OK sensor.
^ Select "Carry out" and touch the OK
sensor.
The capsule hopper inside the machine
will be lowered. The following will then
appear in the display:
i Remove capsule plate and change
the capsule hopper
^ Open the front of the machine.
^ Take out the capsule plate.
Do not reach into the openings in
the brew unit. Danger of injury.
^ Pull the rubber connector
downwards.
52
o n G k C
^ Using the special tool (supplied) as
shown above, turn the capsule
hopper to the left to remove it.
^ Screw the new capsule hopper to the
right into position in the brew unit, as
shown above. The spring with the
ball in the capsule hopper must be
placed so that the ball is at the top.
^ Put the rubber connector back on
from below (the narrow end or funnel
towards the bottom).
^ Insert the capsule plate and close the
machine front.