Hyundai MFC03 Instruction Manual page 22

GB
Assembly and using
Assemble the appliance placing the container into the base. If the container is not installed
properly, it will not switch the machine on. Connect the plug of power cord to power supply.
Then follow the instructions below.
Model MFC 03
1. Start / Stop
Connect the power, you will hear the "beep" sound when the LCD is on, select the function
you need, then press the "Start / stop " button, it starts working. Double press this button, it
stops working and returns to standby mode.
2. Time/Temperature
• Press this button once to adjust the time, the time display on LCD screen starts
flashing. Then, press"+", "-" button to adjust the time. For each press, the time shall
be changed for 1 minute. When press this button without release, the time shall be
changed for 10 minutes. The maximum working hour is 9 hours 59 minutes.
• Double press this button to adjust the temperature, the temperature display on LCD
screen starts flashing, then press "+", "-" buttons to adjust. For each press or nonstop
press, the time shall be changed for 10 degrees. The highest temperature can be up
to 240 ° C, and the lowest temperature is 50 °C.
3 Keep warm
Press this button, the keep warm lamp is on, enter into keep-warm status, the temperature
on LCD display is 80 degrees, and the time is two hours. Press Start / Stop button, the
keep warm lamp goes off, it stops warming and returns to standby mode. During keep
warm process, you can adjust the temperature as your desire. After completed, it returns to
standby mode automatically.
4 Function
It has eight functions on the menu, press the "function" button, it shall move in circle "slow
cook" - "Hot Pot" - "Stir-fry" - "Boil" - "Deep-fry" - "Grill" - "Fry" - "Steam" to select a function,
Each press, you can select one function, the corresponding pattern lamp shall be on and
starts flashing. Then press "Start / stop" button, it starts heating. The selected function
lamp keeps on. During heating process, the time and temperature can be adjusted as your
desire at any time. After the setting is completed, it returns to keep warming status. (When
the specific function is selected, it can not be shifted to other functions, you can press the
"Start/Stop" button to cancel the function and returns to standby mode).
(1) Slow cook:
First, put the soup material or food directly in non-stick heating pot, and then close the
lid, press the "function" button once, the indicator at "slow cook" flashes, press the "Start
/ Stop" button to enter into heating status ( the default temperature for this function is 100
degrees, default time is 6 hours).
During the cooking, press "Time / temperature" button for adjustment as your desire.
As soon as the working is finishes, it comes into keep warm status automatically.
In order to retain heat and moisture, do not remove the lid.
22 / 41