Wlan Internet Access Points - Nokia N95 User Manual

Prompt password
●
password every time you log in to a server, or if
you do not want to save your password in the
device, select Yes.
Password — A password may be needed to
●
make a data connection and is usually provided
by the service provider.
Authentication
●
your password encrypted or
your password encrypted when possible.
Homepage — Depending on the access point
●
you are setting up, enter the web address or the
address of the multimedia messaging centre.
Select Options
>
the following settings:
Network type
●
type to transfer data to and from your device. The
other settings depend on the selected network
type.
Phone IP address
●
address of your device.
DNS address — Enter the IP addresses of the
●
primary and secondary DNS servers, if required
by your service provider. Contact your internet
service provider to obtain these addresses.
Proxy server address
●
the proxy server.
Proxy port number
●
152
of the proxy server.
— If you must enter the
— Select Secure to always send
Normal to send
Advanced settings to change
— Select the internet protocol
(for IPV4 only) — Enter the IP
— Enter the address of
— Enter the port number

WLAN internet access points

Press , and select Tools
Connection Access points
>
or New access point.
Follow the instructions from the WLAN service
provider.
WLAN network name
●
manually or Search for
an existing network, WLAN network mode
WLAN security mode
settings of its access point device.
Network status — Define whether the network
●
name is displayed.
WLAN network mode
●
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same
name.
WLAN security mode
●
used: WEP, 802.1x (not for ad hoc networks), or
WPA/WPA2. If you select
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select WLAN security settings.
Security settings for WEP
Settings
> >
Options Edit
> >
— Select Enter
networks. If you select
and
are determined by the
— Select Ad-hoc to
WLAN network
— Select the encryption
Open network, no