Scenes; Capture Images In A Sequence; View Captured Image; Record Videos - Nokia E75 User Manual

Scenes

A scene helps you to find the right colour and lighting
settings for the current environment. The settings of
each scene have been set according to a certain style
or environment.
To change the scene, select
toolbar.
To make your own scene, scroll to User defined, and
select Options > Change.
To copy the settings of another scene, select
scene mode and the desired scene.
To activate your own scene, select
Select.
Capture images in a
sequence
To capture several images in a sequence, if enough
memory is available, select
toolbar and press the capture key.
The captured images are shown in a grid on the display.
To view an image, scroll to it and press the scroll key.
If you used a time interval, only the last image is shown
on the display, and the other images are available in
Gallery.
To send the image, select
To send the image to a caller during an active call, select
Options Send to caller.
>
Scene modes in the
Based on
User defined
>
Sequence mode in the
Options > Send.
To switch off the sequence mode, select
mode Single shot in the toolbar.
>

View captured image

The image you captured is automatically saved in
Gallery. If you do not want to keep the image, select
Delete from the toolbar.
Select from the following toolbar items:
Send — Send the image to compatible devices.
•
Send to caller — Send the image to the caller
•
during an active call.
Post to — Send the image to your compatible
•
online album (network service).
To use the image as the background image, select
Options Set as wallpaper.
>
To add the image to a contact, select
as contact call img. Assign to
>

Record videos

1. If the camera is in the image mode, select the video
mode from the toolbar.
2. To start recording, press the capture key.
3. To pause recording at any time, select Pause. Select
Continue to resume recording.
4. To stop recording, select Stop. The video clip is
automatically saved in Gallery. The maximum
length of the video clip depends on the available
memory.
Sequence
Options Set
>
contact.
105