Maximizing The Life Of Your Battery - Shark SV769UK Owner's Manual

MAXIMIZING THE LIFE OF YOUR BATTERY

WARNING: Never use ordinary batteries for
replacement as these may leak and damage
your vacuum cleaner. Use only the battery
pack XB769N provided by EURO-PRO Operating
LLC for replacement. Call customer service
at 0800 862 0453 or visit our web site at
www.sharkclean.eu to order replacement
batteries.
CAUTION:
• U se ONLY with battery pack supplied. DO NOT
attempt to use non-rechargeable batteries.
• D o not attempt to remove the battery pack from
the unit to charge.
• N ever throw the battery pack or the appliance
into a fire or incinerate it.
• D o not remove or damage the battery casing.
• D o not place the batteries on metal surfaces.
• D o not touch metal parts of the batteries
together as the batteries will overheat.
Technical Specifications
Battery
Voltage
Type
Weight
Charger
Model Number
Input Voltage
Output Voltage
Current
Approximate Charge Time
Weight
Call customer service at 0800 862 0453 or visit our web site at
www.sharkclean.eu to order replacement battery packs.
4 0800 862 0453
16.8 VDC
Ni-MH
0.345 kg
ZD6W210024**1
100-240 VAC
21 VDC
240 mA
8 hours
0.08 kg
BATTERY PACK DISPOSAL AND REPLACEMENT
The cordless hand vacuum is powered by Ni-MH
batteries, which must be recycled or disposed of properly
in accordance with state, federal and local laws. If
uncertain as to how to remove the battery pack, we
suggest that you take your hand vacuum to a reputable
small appliance service technician to have this service
performed. Do not attempt to replace the batteries used
in this product with any other type of battery. Follow these
steps when replacement of the battery pack is required:
1 Using a #1 Phillips head screwdriver, remove the
single screw securing the battery compartment cover
located underneath the unit.
2 Use a flathead screwdriver to remove the battery
compartment cover. Never open the battery
compartment except to replace the battery pack. Set
the cover and the screw aside.
3 Slide the battery strap over and lift it out.
4 Carefully lift out the battery pack and disconnect the
terminals.
5 Before inserting the new battery, connect the
terminals to the battery pack taking care to connect
the black lead (-) to the negative connector first and
the red lead (+) to the positive connector second.
6 Insert the new battery inside the battery
compartment.
7 Take care to tuck the wiring completely in so
that the wiring does not interfere with the battery
compartment cover when it is replaced.
8 Replace the battery strap by pushing it in all the way.
The battery strap only goes in one way.
9 Replace the battery compartment cover. The holes
for the screw from the battery strap and battery
compartment cover must be aligned.
10 Replace the screw, making sure not to over-tighten it.