Session Initiation Protocol (Sip) Settings; Edit Sip Profiles; Edit Sip Proxy Servers - Nokia E66 User Manual

See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select Menu Tools
>
SIP settings.
Session initiation protocols (SIP) are used for creating,
modifying, and terminating certain types of
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
To create a SIP profile, select
profile Use default profile
>
profile.
To select the SIP profile you want to use by default for
communication sessions, select
profile.

Edit SIP profiles

Select Options > Edit, and select from the following:
Profile name
•
Service profile
•
Default access point
•
use for the internet connection.
142
Settings Connection
> >
Options New SIP
>
or Use existing
Options
>
— Enter a name for the SIP profile.
— Select IETF or Nokia
— Select the access point to
Public user name
•
from your service provider.
Use compression
•
Registration
•
Use security
•
used.
Proxy server
•
this SIP profile.
>
Registrar server
•
settings for this SIP profile.

Edit SIP proxy servers

Select Options
server.
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional
security and speed up access to the service.
Select from the following:
Default
Proxy server address
•
address of the proxy server in use.
Realm
•
User name
•
and password for the proxy server.
Allow loose routing
•
allowed.
Transport type
•
3GPP.
Port — Enter the port number of the proxy server.
•
— Enter your user name received
— Select if compression is used.
— Select the registration mode.
— Select if security negotiation is
— Enter the proxy server settings for
— Enter the registration server
New SIP profile
>
— Enter the host name or IP
— Enter the proxy server realm.
and Password — Enter your user name
— Select if loose routing is
— Select UDP, Auto, or TCP.
or Edit Proxy
>