Infrared; Bluetooth - Nokia E66 User Manual

2. When the device asks which mode is used, select
Mass storage. In this mode, you can see your
device as a removable hard drive in your computer.
3. End the connection from the computer (for
example, from an Unplug or Eject Hardware wizard
in Windows) to avoid damaging the memory card.
To use Nokia PC Suite with your device, install Nokia PC
Suite on your PC, connect the data cable, and select
Suite.
To use your device to connect your PC to the web,
connect the data cable, and select
web.
To synchronise the music in your device with Nokia
Music Player, install the Nokia Music Player software on
your PC, connect the data cable, and select
transfer.
To change the USB mode you normally use with the
data cable, select
USB connection mode
To set the device to ask for the mode each time you
connect the USB data cable to the device, select
Menu Connectivity
>
connection > Yes.

Infrared

Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device
is a Class 1 laser product.
112
Connect PC to
Menu Connectivity
> >
and the desired option.
USB Ask on
> >
Use infrared to connect two devices and transfer data
between them. With infrared, you can transfer data
such as business cards, calendar notes, and media files
with a compatible device.
1. Ensure that the infrared ports of the devices face
each other. The positioning of the devices is more
important than the angle or distance.
2. Select Menu
PC
on infrared on your device.
3. Switch on infrared on the other device and wait a
few seconds until the infrared connection is
established.
4. Locate the desired file in an application or File
manager, and select
infrared.
Media
If the data transfer is not started within 1 minute after
the activation of the infrared port, the connection is
cancelled and must be started again.
USB
>
All items received through infrared are placed in the
Inbox folder in Messaging.
Positioning the devices away from each other breaks
the connection, but the infrared light beam remains
active on your device until it deactivates.

Bluetooth

Select Menu
Connectivity Infrared
> >
Options Send
>
Connectivity > Bluetooth.
>
to switch
Via
>