Master/Slave Mode; Operating Instructions - Ledj spectra flood 18T3 User Manual

Colour mix mode:
To access the colour mix mode press "MODE" until
"ENTER" button and use the "UP" and "DOWN" buttons to select
the display will show the red brightness between
buttons to adjust the red brightness and press the "ENTER" button. Repeat for green (
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the "MODE" button.
Built-in programs:
To access the built-in programs, press the "MODE" button on the rear of the unit to show
on the LED display. Now use the "UP" and "DOWN" buttons to choose the required program
Pr01 Pr10
~ . Press the "ENTER" button to confirm the setting and use the "UP" and "DOWN"
buttons to choose the speed
and use the "UP" and "DOWN" buttons to select the flash speed
Pr01
- Press the "ENTER" button and use the "UP" and "DOWN" buttons to select the static colour
required. Press the "ENTER" button to confirm the setting and use the "UP" and "DOWN" buttons to
select the flash speed
To exit out of any of the above options, press the "MODE" button.
0
- White (RGB)
1
- Red
2
- Orange
Auto mode:
To access auto mode, press the "MODE" button on the rear of the unit to show
display. The unit will now run through its built-in programs.
To exit out of any of the above options, press the "MODE" button.

Master/slave mode:

The default setting for this fixture is Master.
To set the slave unit, press the "MODE" button on the rear
of the master unit to show
The unit is now in Slave mode.
To exit out of any of the above options, press the "MODE" button.
www.prolight.co.uk
SP00 SP99
~
F500 F599
~ .
3
- Light Yellow
4
- Green
5
- Cyan
SLav
on the LED display.
Pr01
shows on the LED display. Now press the
0rgb
r. 0 00 r. 2 55
~ . Now use the "UP" and "DOWN"
. Press the "ENTER" button again to confirm the setting
F500
6
- Blue
7
- Purple
8
- Pink
Spectra Flood 18T3 User Manual

Operating instructions

. Press the "ENTER" button and
9
) and blue (
Pr--
F599
~ .
9
- Yellow
10
- Cool White
11
- Warm White
Auto
on the LED
Menu system
Colour mix mode
r. 0 00~r. 2 55 R
g. 0 00~g. 2 55 G
b. 0 00~b. 2 55 B
Built-in programs
Pr01~Pr10
Auto mode
Auto
Master/slave mode
SLav
DMX mode 1CH, 3CH, 4CH,
5CH, 6CH
Address setting
d001~d512
b
).
7