TP-Link T2600G-28TS Installation Manual page 26

Gigabit L2 Managed Switch
20
Configuration
Logon by Telnet
■
To log on to the switch by a Telnet connection, please take the following steps:
1. Firstly CLI commands about configuring Telnet login mode and login authentication
information should be configured through Console connection. For more details
please refer to the CLI Reference Guide on the resource CD. Here we take login local
mode as an example.
2. Make sure the switch and the PC are in the same LAN.
3. Click Start and type in cmd in the Search programs and files window and press the
Enter button.
Figure 5-5 Open the RUN window
4. Type telnet 192.168.0.1 in the command prompt shown as Figure 5-6, and press
the Enter button.
Figure 5-6 Connecting the Switch
5. Type the default user name and password (both of them are admin), then press the
Enter button so as to enter User EXEC Mode.
Figure 5-7 Enter into the User EXEC Mode
For detailed CLI configuration instructions, please refer to the CLI Reference Guide on
the resource CD.