TP-Link T2600G-28TS Installation Manual page 10

Gigabit L2 Managed Switch
100-240V~50/60Hz 0.5A
Power Socket
Grounding Terminal
Kensington Security Slot
Figure 1-3 Rear Panel of T2600G-28TS
Power Socket
Connect the female connector of the power cord here, and the male connector to
the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz).
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground
the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.
Kensington Security Slot
Secure the lock (not provided) into the security slot to prevent the device from being
stolen.
Caution: Please use the provided power cord.
04
Introduction