Starting A Program; Putting A Program In Hold; Releasing A Program From Hold - Honeywell DCP 50 Product Manual

1.2

STARTING A PROGRAM

To start a program running:
1.3

PUTTING A PROGRAM IN HOLD

A program can be put in Hold (i.e. frozen) at any time whilst it is running. The program
setpoint will stay at its value at the instant the program entered Hold until the
program is released (see Subsection 1.4) or aborted (see Subsection 1.5). To put a
program in hold, momentarily press the
the program is in hold.
1.4

RELEASING A PROGRAM FROM HOLD

To release a program currently in Hold, momentarily press the
indicator will then go ON continuously.
RUN RUN
key. The indicator will flash whilst
RUN RUN
key. The
1-2