Table of Contents
Advertisement
1.5
ABORTING A PROGRAM
To abort the current-running (or held) program, hold down the
seconds. The program will be aborted, the
normal Controller functions will be resumed.
NOTE: When a program is aborted, the instrument returns to the Controller
setpont value. If a program is successfully completed, the Controller setpoint is
automatically set to the final setpoint value of the program. If it is desired to
restore the initial Controller setpoint value after the program is completed,
theis value should be used as the program's Final Setpoint Value.
1.6
DISPLAY SEQUENCE - PROGRAM RUNNING
1-3
RUN
RUN
indicator will go OFF and the
key for 5
Hide quick links:
Advertisement
Table of Contents
