Table of Contents
Advertisement
3
PROGRAM DEFINITION MODE -
CREATING/EDITING A PROGRAM
NOTE: Program editing/creation is not possible whilst any program is
running or held.
3.1
ENTRY
In Base Mode, select the required Program Number (see Subsection 1.1), then:
NOTE: If the Program Define Mode lock code has been set to 0, pressing the
SET UP key in Step 2 will give direct access to Program Define Mode; no entry
of lock code is required.
Upon entry into Program Define Mode, the first Segment Definition parameter for
Segment 1 of the selected program will be displayed.
3-1
Hide quick links:
Advertisement
Table of Contents
