Plan A Route; Navigation Settings - Nokia AUTO NAVIGATION 500 Getting Started Manual

Navigate to a point of interest
You can search for a point of interest located near the desired location.
To navigate to a point of interest, press the menu key, and tap
Navigator > Destination > POI search. The starting point (usually your
current location) of the search is shown at the top of the screen. To
change the starting point, tap Where? and then Address to enter the
address, Favourites to select a previously saved address, or GPS position
to set your current location as the starting point.
Tap the category and subcategory for the point of interest. Alternatively,
tap , enter the name of the point of interest, and tap .
A list of found points of interest is displayed. The list is sorted by the
distance to the starting point. Tap the desired point of interest and the
option that you want to use.

Plan a route

You can plan your route in advance, also without GPS connection.
To plan a route, press the menu key, and tap Navigator > Destination.
Select the start point for the route in the same way as a destination, and
add it to the route (Via). When you tap Via, Destination list is displayed.
To add a waypoint to the route, tap +, and select the location in the
same way as a destination. To delete a stopover from the trip, tap the
stopover on the list and .
After you have set up the route, tap and Routing. After the route has
been calculated, a route summary is displayed. To view a detailed
waylist, tap the right arrow. To view the waypoints on the map, tap the
right arrow again. To move to the previous or next waypoint, tap the
arrow at the left or right side of the waypoint name. To return to the
previous screen, tap the left arrow.

Navigation settings

Press the menu key, and tap Navigator > Settings and one of the
following:
9
© 2008 Nokia. All rights reserved.