Restore Default Iap; Security; Device Security; Defining Device Lock Settings - Nokia 9300i User Manual

C o n t r o l p a n e l
• Connection timeout — Specify how long RealPlayer waits before reporting a network connection failure. Increase the time
if you frequently receive a time-out error.
• Server timeout — Specify how long RealPlayer waits for a response from the media server before disconnecting.
• Port range: — Specify the port range that is used for receiving data.
• Use proxy: — Select Yes, if your Internet service provider requires that a proxy server is used to connect to the Internet.
• Host address: — Enter the proxy server address.
• Port: — Enter the port number of the proxy server.

Restore default IAP

Your device contains predefined, default Internet access points that are generated automatically when a new SIM card is inserted
into your device for the first time. If you delete these access points, you can restore them with the
To restore the predefined Internet access points, select

Security

Go to Desk Tools Control panel
> >

Device security

You can modify the security settings for the PIN code, automatic locking of the device, and changing of the SIM card. You can
also change the PIN code, PIN2 code, lock code, and barring password.
Avoid using codes that are similar to emergency numbers, such as 112, to prevent accidental dialling of the emergency number.
Codes are shown as asterisks. When changing a code, enter the current code, and then the new code twice.

Defining device lock settings

Important: In the offline profile you cannot make or receive any calls, or use other features that require GSM network
coverage. To make calls, you must first activate the phone function by changing profiles. You may, however, be able
to make an emergency call in offline profile by pressing the power key on the cover of the device and then entering
the official emergency number. This can be done using the cover phone interface only, not the communicator interface.
If the device has been locked, enter the lock code to activate the phone function. When the device is locked, calls may
be possible to the official emergency number.
Making an emergency call in the offline profile or when the device is locked requires that the device recognize the
number to be an official emergency number. It is advisable to change the profile or unlock the device by entering the
lock code before you make the emergency call.
To define device lock settings, select
Define the following:
• Autolock period — You can set a time-out after which the device is automatically locked and can be used only if the correct
lock code is entered. When the device is locked, calls may still be possible to the official emergency number programmed
into your device. You can also answer incoming calls.
• Lock code — Press Change
avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from
your device.
• Lock if SIM card is changed
device. The device maintains a list of SIM cards that are recognized as the owner's cards.
• Allow remote locking — If you set this option to Yes, you can lock the device by sending a predefined text message from
another phone.
To create a remote locking message, select
lock code, and enter text for the remote locking message in the
locking message is case-sensitive and can be 5 to 20 characters or digits long. Press
changes to take effect.
Tip: If you use a memory card with no password, the memory card will be locked when you lock your device with the
remote locking message. To remove the memory card password, select
and select Memory card
press Remove. If the remote locking message is longer than 8 characters, the first 8 characters of the message are used
as the memory card password.

Defining PIN code settings

To define PIN code settings, select
Define the following:
Copyright © 2005 Nokia. All Rights Reserved.
> Security.
Security Device
>
to change the lock code. The new code must be 5 to 10 digits long. The preset code is 12345. To
— You can set the device to ask for the lock code when an unknown SIM card is inserted into your
Security
>
Security Remove
> >
Security Device security, and select the
>
Connections Restore default
>
security, and select the Device lock
Device security. Set the option
Message field. Confirm the message, and press Done. The remote
password.... Enter the remote locking message as your password, and
PIN codes
65
Restore default IAP
IAP, and press Yes.
page.
Allow remote locking
Reboot to restart the device and for the
Desk Office File manager, press Menu,
> >
page.
application.
to Yes, enter your