Presentations; Viewing Presentations; Viewing Slide Shows; Showing Slide Shows With A Data Projector - Nokia 9300i User Manual

10.

Presentations

In Presentations, you can open, view, edit, and save presentations created with Microsoft PowerPoint 97 or later. You can also
create new presentations. Note that not all features and formatting of the original files are supported.
Go to Desk Office > Presentations.
>

Viewing presentations

To open an existing presentation, press Menu, and select
saved. You can scroll the slide up and down, left and right with the joystick.
Tip: To open a recently viewed presentation, press Menu, and select
To move between slides, press
slide.... Select the slide from the list, and press Go.
To zoom the view, press Menu, and select
Tip: You can also zoom in and out by pressing Chr and the magnifying glass keys.
To view slides in full screen mode, press Menu, and select
buttons to display the commands. You can also use Ctrl+T to switch between the full screen and normal screen modes.

Viewing slide shows

Special effects or animation in a presentation are shown in a slide show. Note that not all special effects or animations are
supported.
To start a slide show, press Menu, and select
To set slide show options, press Menu, and select
To move between slides in a slide show, press Menu, and select
Menu, and select Show
>
the slide from the list, and press Go.
To end the slide show, press Menu, and select

Showing slide shows with a data projector

You can show slide shows with a compatible data projector, or other compatible projection system. The slide show is transferred
to the data projector using a Bluetooth connection.
To be able to show slide shows with a compatible data projector, you need to install the drivers of the data projector. If the
drivers are not installed, the menu options are not visible. For more information, check with the data projector manufacturer
or its representative.
To show slide shows with a data projector, select the presentation, press Menu, and select
external display. To start the slide show, press Menu, and select
or animations are supported. If the presentation contains notes, they are only visible on the communicator display.
Tip: If you have not selected a data projector earlier, the
Connect, then Done.
Tip: If you switch from the slide show view to another view during the show, for example, to outline view, the
presentation is no longer displayed on the external view. To continue showing the slide show with a data projector,
switch back to the slide show view.
To change the data projector, press Menu, and select
dialog, select a device from the list, and press Connect, then Done.
To stop showing a slide show with a data projector, press Menu, select

Creating presentations

To create a new presentation, press Menu, and select
start writing. When you are ready, press OK, and move to the next text field. If you want to use a template, press Menu, and
select File New presentation
>
Copyright © 2005 Nokia. All Rights Reserved.
Next and Previous. To move directly to a specific slide, press Menu, and select
View > Zoom.
View
>
View
First slide or Last slide. To move to a specific slide, press Menu, and select
Show
Use template.... Browse for the folder where the template is saved.
>
File > Open..., or press Ctrl+O. Browse for the folder where the file is
View Full screen mode. In full screen mode, press any of the command
>
Slide show View show.
>
Slide show Show unsupported objects
> >
Show Next and Previous. To select the first or last slide, press
>
End show.
>
View Slide show
>
External display
View Slide show External display
> >
View Slide
>
File New presentation. Activate a text field by pressing the tab key, and
>
52
File Recent presentations.
>
or Show
Tools
View Slide show
>
View show. Note that no special effects
>
dialog opens. Select a data projector, press
settings.... In the
show, and deselect Show on external
Tools Go to
>
animations.
Go to slide.... Select
>
Show on
>
External display
display.