Advertisement
• 2.0" screen
• G-Sensor with Collision Detection
Mode
WHAT'S IN THE BOX
• Camera/Recorder
• Car Adapter
• MiniUSB-USB Cable
If any items are missing or damaged, contact our Customer Care Line
immediately at 800-297-1023. Never use damaged products!
Need help? Get answers 24/7 at our website: www.uniden.com.
CONTROLS AND INDICATORS
Camera release
latch
IR LEDs
Lens
Left side (not shown)
Power Input
Microphone
HDMI Jack
INSTALLING THE CAM500
Installation Safety Warnings
WARNING! Failure to comply with the following warnings could result in an
accident or collision, resulting in death or serious injury.
Do not obstruct the driver's view or the operation of the vehicle itself.
Do not place it unsecured on the dashboard or in front/above an airbag.
Do not mount the camera where it will become a distraction if it becomes loose.
Do not attempt to operate the camera while driving.If you need to access the
CAM500 to change settings, etc,, pull off the road in a safe manner to do so.
Some state laws prohibit drivers from mounting anything on the windshield,
• Recording to microSD card
• Windshield Mount
• HDMI Cable
• Owner's Manual
Power on LED
Locking ring
Power on/o
microSD slot
MENU
Mode
Scroll
Scroll
OK
or Back
up
down
(Record start/stop
Select item)
- 2 -
or restrict mounting to specific areas of the windshield. It is the owner's
responsibility to mount the CAM500 in compliance with local laws.
1.
Slide the CAM500 onto the bracket hook on the top of the windshield mount until
it locks into position.
2.
Be sure the locking ring is set to UNLOCK. Press the suction cup base to the
windshield.
3.
Turn the locking ring to LOCK. Make sure the stand is locked to the windshield.
4.
Connect the car adapter to the unit and to the cigarette lighter power jack.
5.
Press POWER to turn the unit on and check the view. Adjust the angle if
needed.
To unmount the stand, turn the locking ring to the UNLOCK position then lift the
6.
plastic flap on the base to release it from the windshield.
OPERATION
SET UP THE CAM500
If you are recording (red dot on the screen is flashing), press OK to stop
recording. You cannot enter the menus if CAM500 is recording.
Press MODE then M to set up your camera. Select a mode [Video, Still (photo),
or Playback] and then press M to display the settings for that mode. The menus
for Video and Still have 2 options – that mode plus Setting. Playback lets you
delete and protect files on the microSD card (not included - class 10 microSD card
recommended).
Video Mode
Press MODE until
displays in the upper left corner of the screen. Press M once to
display the Video menu options and twice to display the Setting menu options.
VIDEO MENU
Resolution
Loop Recording
Exposure
Motion Detection
Record Audio
G Sensor
Date Stamp
Monitor Parking
Parking Sensitivity
SETTING MENU
Date/Time
Car/Driver ID
Auto Power Off
Key Click Sound
Language
TV Mode
Frequency
Screen Saver
IR LED
- 3 -
Advertisement
