Profiles (Menu 3) - Nokia 8310 User Manual

calls to a certain amount of charging units or units of currency. The PIN2 code is needed for the call
cost settings.
Note: When no more charging units or currency units are left, calls may only be possible to the
emergency number programmed into your phone (e.g. 112 or other official emergency number).
• GPRS data counter
and received in total, and to clear the counters. The counters unit is a byte.
• GPRS connection timer
GPRS connection. You can also clear the timers.

Profiles (Menu 3)

Your phone has various setting groups, profiles, for which you can customise the
phone tones for different events and environments. At first, personalise the profiles
to your liking and then you only need to activate a profile to use it.
Available profiles are General, Silent, Meeting, Outdoor, and Pager.
Press Menu and select Profiles. Scroll to a profile and press Select.
• To activate the profile, select Activate.
Tip: To change the profile quickly in standby mode, press the power key
profile you want to activate and press Select.
• To set the profile to be active for a certain amount of time up to 24 hours, select
time. When the time set for the profile expires, the previous profile that was not timed, becomes
active.
58 ©2002 Nokia Corporation. All rights reserved.
and scroll to check the amounts of last sent and last received data, data sent
and scroll to check the duration of the last GPRS connection or the total
, scroll to the
Timed and set the