Registering; Changing The Display Language - Siemens Gigaset SL1 colour Manual

Preparing to use your phone
The battery charging status is correctly displayed only after uninterrupted charging/
discharging. You should therefore avoid removing the battery unnecessarily and
ending the charging process prematurely.
Once initial charging is complete, you can replace your handset in the
◆
charging shell after each call. Charging is controlled electronically.
i This ensures that the battery is charged in a way that maximises its
life.
The battery heats up during charging. This is normal and not
◆
dangerous.

Registering

Before you can use your Gigaset SL1 colour you must register it manually. You must
initiate handset registration on the handset and on the base.
1. On the handset
v
s
[______________________________________________]
H/Set Settings
s
[______________________________________________]
Register H/Set
s
[______________________________________________]
Base 1
OK
Base 1 flashes in the display when the system PIN has been entered.
2. On the base
Please refer to the operating instructions for the base to find out how to initiate handset
registration on the base.

Changing the display language

You can view the display texts in different languages.
v
s
[______________________________________________]
H/Set Settings
s
[______________________________________________]
Language
s
OK
a
You have selected a language in error:
Press v M I, select the correct language with s and then press
6
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e.g. Base 1.
OK
Enter the system PIN of the base (the default is 0000)
and confirm.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm. The current
OK
language is checked ‰ (the default setting is
English).
Select a language and confirm.
Long press (back to idle status).
to confirm.
OK