Registering Handsets - Siemens Gigaset SL78H Manual

First steps

Registering handsets

A Gigaset SL78H handset can be registered to up to four bases.
Registration of Gigaset SL78H
You must initiate handset registration on the handset (1) and on the base (2).
Once it has been registered, the handset returns to idle status. The handset's inter-
nal number is shown in the display e.g. INT 1. If not, repeat the procedure.
1) On the handset
Register Handset
Base 1
Base 2
Base 3
Base 4
Back
The display indicates that a base that is ready for registration is being searched for.
Please note
If the handset is already registered to a base, start the registration procedure as
follows:
¢
v
10
Register
OK
Ï
¢
Registration
¤
Press the key below
play screen to open the input field.
The submenu Register Handset is shown
in the display.
¤
Press the key below
screen to start the registration.
If requested, enter the system PIN of
the base (the default is 0000) and
§OK§
press
¢
Register Handset
§Register§
on the dis-
¤
Press down-
wards on the con-
trol key to select
the required base.
§OK§
on the display
.