Technical Data; Declaration Of Conformity; Battery Charging - Bosch GKS 18 V Professional Original Instructions Manual

24 | English

Technical Data

Circular Saw
Article number
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Mounting bore
Weight according to EPTA-Procedure 01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
08.01.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
1 609 929 N80 | (6.2.08)
Dr. Eckerhard Strötgen
Head of Product
Certification
GKS 18 V
Professional
3 601 F66 F..
V=
rpm
mm
mm
mm 145 x 290
mm
mm
mm
mm
kg
Assembly

Battery Charging

A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cy-
cles.
To remove the battery 19, press the unlocking
buttons 18 and pull the battery out of the ma-
chine to the rear. Do not exert any force.
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
A significantly reduced working period after
charging indicates that the battery is used and
must be replaced.
Observe the notes for disposal.
GKS 24 V
Professional
3 601 H73 D..
18
3500 3500
54
38
145 x 290
160 160
150 150
1.8 1.8
20
3.9 4.4
Bosch Power Tools
24
54
38
20