Hitachi VTP-18 Handling Instructions Manual page 6

English
(4) Replace the handle cover, while being careful to
ensure it does not pinch the lead wire, and secure
it firmly with the three screws.
CAUTION
Should the lead wire be pinched by the handle
cover or come in contact with the armature or
rotating parts of the motor, a serious danger of
electric shock to the operator will be created. Exercise
extreme caution in disassembling and reassembling
the motor, follow the above procedure exactly.
DO NOT attempt to disassemble any parts other
than those necessary to effect replacement of the
carbon brushes.
5. Maintenance of the motor
The motor unit winding is the very "heart" of the
power tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
NOTE
Due to HITACHI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
6