Page 3
Symbols English WARNING Rechargeable battery The following show symbols Latch used for the machine. Be sure that you understand their Battery cover meaning before use. Terminal Read all safety warnings Ventilator and all instructions. Push Failure to follow the warnings and instructions may result Pull out in electric shock, fi...
Carrying power tools with your fi nger on the switch or GENERAL POWER TOOL SAFETY WARNINGS energising power tools that have the switch on invites accidents. WARNING d) Remove any adjusting key or wrench before Read all safety warnings and all instructions. turning the power tool on.
c) When battery pack is not in use, keep it away 13. When mounting a bit into the keyless chuck, tighten the from other metal objects like paper clips, coins, sleeve adequately. If the sleeve is not tight, the bit may keys, nails, screws, or other small metal objects slip or fall out, causing injury.
2. Do not pierce battery with a sharp object such as a nail, CAUTION strike with a hammer, step on, throw or subject the battery 1. If liquid leaking from the battery gets into your eyes, do not to severe physical shock. rub your eyes and wash them well with fresh clean water 3.
STANDARD ACCESSORIES BATTERY REMOVAL/INSTALLATION 1. Battery removal 1 Plus driver bit (No. 2) ......1 Hold the handle tightly and push the battery latch (2 pcs.) to remove the battery (See Figs. 1 and 2). 2 Charger (UC18YKSL) ......1 CAUTION DV18DGL Never short-circuit the battery.
(2) Regarding the temperature of the rechargeable battery. ○ When the pilot lamp fl ickers (at 0.2-second intervals), The temperatures for rechargeable batteries are as check for and take out any foreign objects in the charger’s shown in Table 2, and batteries that have become hot battery connector.
Page 9
○ To make holes in the metal, wood or plastic, switch to ○ When setting the shift knob to “HIGH” (high speed) and “Rotation (Rotation only)”. the position of the clutch dial is between “15” and “22”, it ○ To make holes in bricks or concrete blocks, switch to may happen that the clutch does not engaged and that “Impact (Impact + Rotation)”.
Repair, modifi cation and inspection of Hitachi Power 13. Using the hook (sold separately) Tools must be carried out by a Hitachi Authorized Service The hook is used to hang up the power tool to your waist Center.
Page 11
In case of complaint, please send the Power Tool, undismantled, with the GUARANTEE CERTIFICATE found at the end of this Handling instruction, to a Hitachi Authorized Service Center. NOTE Due to HITACHI’s continuing program of research and...
Page 13
English Nederlands GUARANTEE CERTIFICATE GARANTIEBEWIJS 1 Model No. 1 Modelnummer 2 Serial No. 2 Serienummer 3 Date of Purchase 3 Datum van aankoop 4 Customer Name and Address 4 Naam en adres van de gebruiker 5 Dealer Name and Address 5 Naam en adres van de handelaar (Please stamp dealer name and address) (Stempel a.u.b.
Page 15
Precedent Drive, Rooksley, Milton Keynes, MK 13, 8PJ, United Kingdom Tel: +44 1908 660663 Fax: +44 1908 606642 URL: http://www.hitachi-powertools.co.uk Hitachi Power Tools France S. A. S. Parc de l’Eglantier 22, rue des Cerisiers, Lisses-C.E. 1541, 91015 EVRY CEDEX, France Tel: +33 1 69474949 Fax: +33 1 60861416 URL: http://www.hitachi-powertools.fr...
Directives 2004/108/EC, 2006/95/EC and 2006/42/EC. This product also conforms to RoHS Directive 2011/65/EU. The European Standards Manager at Hitachi Koki Europe Ltd. is authorized to compile the technical fi le. This declaration is applicable to the product affi xed CE marking.