Environmental Protection; Technical Specifications - Metabo KS 66 Original Instructions Manual

en ENGLISH
10. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Any Metabo power tool in need of repair can be sent
to one of the addresses listed in the spare parts list.
Please enclose a description of the fault with the
power tool.

11. Environmental Protection

To protect the environment, do not dispose of
power tools or battery packs in household
waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.

12. Technical Specifications

Explanatory notes on the information on page 3.
Changes due to technological progress reserved.
P = Rated power consumption
1
P = Power output
2
n = No load speed
0
n = On load speed
1
T = Max. cutting depth (90°)
90°
T = Max. cutting depth (45°)
45°
A = Adjustable angular cut angle
D = Saw disc diameter
d = Saw disc drill diameter
a = Max. base body thickness of saw disc
b = Cutting width of saw disc
c = Thickness of splitting wedge
m = Weight
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
Emission values
Using these values, you can estimate the
emissions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
tool or power tool. In estimating the values, you
should also include work breaks and periods of low
use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a = Vibration emission value
h, D
(Sawing chip board)
K = Uncertainty (vibration)
h,D
Typical A-effective perceived sound levels::
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty
14
pA WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!