Denon AVR-S920W Owner's Manual page 195

Contents Connections
o Surround Dolby
Set the presence and size of the surround Dolby speakers.
Large:
Small
(Default):
None:
0 When "Assign Mode" setting is "Surround Dolby", you can make this setting.
(v p. 190)
Front panel Display
Playback
Use a large speaker that can adequately
play back very low bass frequencies.
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Select when the surround Dolby
speakers are not connected.
Rear panel
Settings
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o Unit
Set the unit of distance.
Feet (Default)
Meters
o Step
Set the minimum variable width of the distance.
1 ft / 0.1 ft (Default: 1 ft)
0.1 m / 0.01 m
195
Remote
Tips Appendix
Index