Denon AVR-S920W Owner's Manual page 167

Contents Connections
o ARC
On the TV connected to the HDMI MONITOR 1 connector, set whether
to receive sound from the TV via HDMI.
On:
Off
(Default):
0 You can adjust the volume of this unit using the TV remote control.
0 If using this function, use a TV compatible with ARC (Audio Return Channel)
and enable the HDMI control function of the TV.
0 When "HDMI Control" is set to "On", the "ARC" settings automatically switch
"On". (v p. 166)
NOTE
0 If the "ARC" settings have been changed, always reset the power to
connected devices after the change.
Front panel Display
Playback
Use ARC function.
Do not use ARC function.
Rear panel
Settings
o TV Audio Switching
Sets automatic switching to the "TV Audio" input when a TV connected
via HDMI sends an appropriate CEC control command to the AVR.
On
(Default):
Off:
0 "TV Audio Switching" can be set when "HDMI Control" is set to "On".
(v p. 166)
167
Remote
Tips Appendix
Select the "TV Audio" input automatically
when receiving a command from the TV.
Do not select the "TV Audio" input
automatically when receiving a command
from the TV.
Index