Delay Time; Effect Level - Denon AVR-S920W Owner's Manual

Contents Connections
o Center Spread
Center spread expands the center channel signal to left and right front
speakers to create a wider frontal audio image for the listener. It is
optimized and designed primary for playback of stereo music content.
On:
Off
(Default):
0 You can set this when sound mode is "Dolby Surround".
o DTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):
Off:
0 You can set this when sound mode is "DTS:X" or "DTS:X MSTR".
Front panel Display
Playback
Use "Center Spread".
Do not use "Center Spread".
Use "DTS Neural:X".
Do not use "DTS Neural:X".
Rear panel
Settings
o Delay Time
Adjust the audio delay time against video to extend the sound field
image.
0 ms – 300 ms (Default : 30 ms)
0 You can set this when the sound mode is "Matrix".
o Effect Level
Adjust the sound effect level of the current sound mode.
1 – 15 (Default : 10)
0 Set to a lower level if the positioning and sense of phase of the surround
signals seems unnatural.
153
Remote
Tips Appendix
Index