Denon AVR-S920W Owner's Manual page 184

Contents Connections
6
When the following screen is displayed, select "Begin
Test" and then press ENTER.
Start the measurement of the first position.
Audyssey Setup
Select "Begin Test" to start the calibration.
NOTE: You will hear a series of loud chirps starting and stopping
during the tests.
Ear Height
Back
Measurement requires several minutes.
0
NOTE
0 If "Caution!" is displayed on TV screen:
0 Go to "Error messages" (v p. 188). Check any related items, and
perform the necessary procedures.
Front panel Display
Playback
Begin Test
184
Rear panel
Settings
7
When the detected speaker is displayed, select "Next"
and then press ENTER.
Audyssey Setup
Speaker Detection
Front :Yes
Center :Yes
Subwoofer :Yes
Surround :Yes
Surr. Back :No
Repeat Last Test
Remote
Tips Appendix
Next
Index