Denon AVR-S920W Owner's Manual page 165

Contents Connections
o HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Off:
Front panel Display
Playback
Transmits the selected HDMI input
through the AV receiver's HDMI output
when this unit is in standby power mode.
No HDMI signals are transmitted through
this unit's HDMI output in standby power
mode.
Rear panel
Settings
o Pass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CD
z
(Default : CBL/SAT):
z"Pass Through Source" can be set when any of the HDMI
connectors is assigned to "CD" for the input source in the "Input
Assign" setting. (v p. 176)
0 "Pass Through Source" can be set when "HDMI Control" is set to "On" or
"HDMI Pass Through" is set to "On". ("HDMI Pass Through" (v p. 165),
"HDMI Control" (v p. 166))
165
Remote
Tips Appendix
The most recently used input source will
go into standby mode.
Pass through the selected input source.
Index