Specifications - Toro Z Master 3000 SERIES Operator's Manual

engage the blades and release. To disengage the blades, push
the blade control switch (PTO) down or move a motion
control lever into the neutral lock position.
Ignition Switch
This switch is used to start the mower engine and has three
positions: Start, Run and Off.
Motion Control Levers
The motion control levers are used to drive the machine
forward, reverse, and turn either direction.
Neutral Lock Position
The neutral lock position is used with the safety interlock
system to engage and to determine neutral position.
Fuel-shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.

Specifications

Note: Specifications and design are subject to change
without notice.
Width:
48 inch Deck 52 inch Deck
Without deck 116.1 cm
(45.7 inches)
Deflector—up 137.2 cm (54
inches)
Deflector— 161.4 cm
down (63.6 inches)
60 inch Deck
116.1 cm (45.7 134.6 cm
inches) (53.0 inches)
156.8 cm
146.0 cm (57.5
inches) (61.7 inches)
171.8 cm (67.6 192.2 cm
inches) (75.7 inches)
Length:
48 inch Deck
Roll bar—up 201.2 cm
(79.2 inches)
Roll 205.5 cm
bar—down (80.9 inches)
Height:
Roll bar—up
179.1 cm (70.5 inches)
Weight:
Model
74952
74953 and 78953
74957
13
52 inch Deck 60 inch Deck
201.2 cm 211.1 cm
(79.2 inches) (83.1 inches)
205.5 cm 215.4 cm
(80.9 inches) (84.8 inches)
Roll bar—down
118.9 cm (46.8 inches)
Weight
475 kg (1048 lb)
492 kg (1085 lb)
533 kg (1170 lb)